Track linear light track light maintenance methodTry not to switch frequently when using track linear lighting, because when the lamp is frequently started, the current through the filament is greater than the current during normal operation, which makes the temperature of the filament rise sharply and accelerate sublimation, which will greatly reduce its service life. Therefore, it is necessary to minimize the switch of led track light fixtures.
During cleaning and maintenance, you should be careful not to change the structure of the lamp, and do not randomly replace some parts in the track linear lamp. After the cleaning and maintenance, you should install the lamp as it is, and do not miss or wrongly install the lamp parts; The light source parameters provided by the logo should replace the aging lamp tube in time. If the two ends of the lamp tube are red, the lamp tube is black or dark, and the lamp tube does not light up, the lamp tube of the track linear lamp should be replaced in time to prevent ballast Unsafe phenomena such as burnout
If you are interested in track linear light,You can browse related products and initiate consultations on our website.